Muc-Off Bio Sealing Liquid Bottle 1 Liter

Muc-Off Bio Sealing Liquid Bottle 1 Liter

The world's first tubeless sealant with UV detection dye

Looking for a super light but tough tubeless sealant? Boom, you just found it, buddy! No Puncture Hassle performs under the most brutal racing conditions. Cutting-edge molecules fill the largest holes and tears, while advanced latex instantly forms a strong seal. Our formula also contains a unique UV detection system that highlights any punctures you may have missed during your ride.

Developed with the world's best downhillers and professional peloton teams, to give you the best tire sealant available. It is non-corrosive and washes off easily with water. Compatible with UST tubeless and full wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our bag is designed to fit your Presta valve perfectly and is ideal for adding to your tool kit or travel pack for emergency refills on the go!

Characteristics:

• For downhill / enduro / road
• Seals breaks and holes up to 6 mm.
• Seals porous tires and bead/rim gaps
• Lasts more than 6 months in temperate climates * and does not increase
• Contains cutting-edge molecules to fill large holes and tears.
• Includes an exclusive UV detection system that highlights any punctures
• Non-corrosive and easy to wash with water.
• No ammonia
• CO2 compatible

Minimum quantity per tire:

(add up to an additional 30 ml for added protection)

• Highway: 30-45 ml (2 to 3 tablespoons)
• 26" MTB and 27.5": 60-75ml (4 to 5 tablespoons)
• Cross 700c: 60-75ml (4 to 5 tablespoons)
• 29" MTB: 105ml-140ml (7 or full bag)
• Drop: 120-140 ml (8 or full bag)

*If used in extreme heat (+35°C), simply refill if necessary.

Instructions for use:

• Shake bottle vigorously before use.
• Put your bike in a workstation if possible.
• Start by removing the plastic seal under the bottle cap, cut off the top of the nozzle, and insert the fill tube.
• Remove your Presta valve core (if you have non-removable valve cores, simply pour directly into your seatless tire and remount).
• With the valve in the 12 o'clock position and using the non-drive side of the bike, push the fill tube over the valve and turn the valve to the 6 o'clock position.
• Squeeze out the desired amount, reinsert the valve core, and inflate the tire according to your manufacturer's recommendations.
• Spin the wheel repeatedly, shake it back and forth, and voila! Now you're ready to rock and roll!
• Keep out of the reach of children.
• Dispose of contents/container in accordance with local regulations.
• Avoid eye contact. Do not drink.

Using the Valve Core Removal Tool

1. Remove the plastic dust cap from your Presta or Schrader valve.
2. Make sure you have removable valve cores (not all Presta valve cores are removable).
   If the threaded top of the valve core has two flat sides, then it is removable.
3. To remove the valve core on your Presta valve, place the oval shaped hole (A) over the top of the valve and line up the flat edges, you will feel it snap into place. Unscrew the thread in a counterclockwise rotation until the core comes loose (keep this part secure).
4. For Schrader valves, use the two-prong end of the tool (C) and insert it into the inside of the valve and unscrew counterclockwise until the core comes loose (keep this part secure).
5. After filling the sealant through your coreless valve, be sure to reinsert the valve core into your valve and tighten in clockwise rotation until tight.
6. After use, the valve core removal tool can be stored in your valve: simply place an O-ring on the valve and slide it down as far as possible, then insert the tool into the valve (B) and slide it back. down above the ring. Place another O-ring over the top and press firmly toward the tool to keep it secure.

How to apply: